Arms on Evaluation: Keg Connection Kegerator Conversion Kits

This overview is by Homebrew Finds Contributor Brad Probert.  Brad is an engineer, knowledgeable homebrewer and skilled reviewer.  Seize a hyperlink to Brad’s web site on the finish of this overview.

Kegerator Conversion Kits from Keg Connection

Most everybody that homebrews, began out by bottling their homebrew. And lots of people which have achieved it for a couple of years finally transfer to kegging. If you happen to haven’t made the transfer but, you could be attempting to determine between shopping for a pre-configured kegerator or getting a kegerator package and a fridge or freezer to construct your self one thing customized. After I first moved to kegging I used to be too intimidated to go the customized route and acquired a pre-configured kegerator. If I had recognized then how easy a package was, I positively would have gone the customized route and bought extra for my cash.

Restricted Time Deal, Evaluation Continues Beneath:

Full ball lock conversion package together with kegs and tank.

• Keg Connection has this setup marked down a whopping 25% to $344.66.
• HBF Reader Coupon!  As of this posting, coupon code HBF5OFF takes a further 5% off.  Examine Keg Connection for present availability.
• + Half Value Add On Kegs: Save 50% on homebrew kegs once you buy them with a keg package. It’s straightforward! When selecting your choices in any of our homebrew kegging kits, choose the keg you need and it’ll robotically take 50% off that keg (or kegs bundle) when including it to your cart.
• Delivery is a flat price regardless of now a lot you order to many US addresses.

2 Faucet Full Fridge Keg Package for Homebrewers – INCLUDES Ball Lock Kegs + CO2 Cylinder – use coupon code HBF5OFF to avoid wasting extra

I just lately scavenged my authentic 2-tap kegerator for elements when constructing my upgraded 4-tap keezer. However then I made a decision I had a use for the kegerator once more, so I wanted to get a package to convey it again on-line. Keg Connection carries a myriad of kits. If I used to be ranging from scratch and customizing my very own keg-bearing fridge, I might get a package a package that had the shanks and every thing to place the faucets into the door. Or a tower package to come back up out of the highest of a small dorm-sized fridge. In my explicit case, I nonetheless had the 2-tap tower and shanks, so I solely wanted a few of the parts. Keg Connection permits you to customise to any stage with affordable worth changes for no matter you add or delete. So I bought solely what I wanted.

Get the Gear

Featured on this overview – 2 Faucet Fundamental Homebrew Kegerator Package | Full Lineup – through Keg Connection | Additionally: Specials and Offers – Keg Connection periodically has stellar offers on kegs

Arms On Evaluation

Essentially the most vital a part of the package was the Chudnow WYE strain regulator. This was on the economical facet of the various choices that might be chosen for regulator. With a twin faucet setup, the choices might imply a twin regulator configuration to allow you to independently set and skim pressures on every faucet. The Chudnow regulator had a single adjustment to feed each traces. Every line had its personal shut-off valve so you can run one or two kegs off the identical strain. The second gauge monitored the strain popping out of the CO2 tank so you can preserve tabs on tank strain, and when strain drops, know it’s worthwhile to get a refill earlier than working out. The gauges had been printed very clearly with sharp distinction, making them straightforward to learn within the low mild contained in the kegerator.

The fuel traces had been a superb glowing purple coloration. If you happen to would’ve requested me what coloration fuel traces I wished in my kegerator, I in all probability would’ve mentioned it didn’t matter. However it’s wonderful how a lot the purple coloration brightens issues up and makes it look flashy. All the things got here pre-assembled with Teflon tape on the joints the place screwed to the regulator physique and Oetiker clamps the place hoses had been clamped to fittings. This straightforward step taken care of by Keg Connection makes the system super-easy to put in. It additionally little doubt saved numerous irritating time monitoring down potential leaks at joints if it had been self-assembled.

The ball lock connections had been from CM Becker. These German-made disconnects carry a robust status within the homebrewing world. The status is predicated on strong design that stands as much as utilization, in addition to exact dimensions to stop free becoming or leaky connections. Whereas I can positively report with another disconnects I’ve had points each with fuel leakage and troublesome operation, these CMB disconnects labored nice with no points. In fact time would be the true take a look at. Based mostly on their status, I count on to be very happy with them. Keg Connection believes in them strongly sufficient to solely carry CM Becker.

For the faucets, I went with the usual model. They labored as meant and had a fantastic shiny chrome end. I do know the advantages of forward-sealing taps, and Keg Connection offers a number of faucet improve choices in order for you. However these commonplace taps look excellent, and so long as you could have an extended faucet deal with to provide you some leverage over sticky sliders, they’re good.

The liquid traces weren’t as flashy as the intense purple fuel traces, however that is with good purpose. You desire a clear beer line so you may see cleanliness and spot any nastiness build-up that tells you if cleansing doesn’t do the trick, it’s time to switch. And naturally it got here with CM Becker disconnects on the liquid finish, identical to the fuel.

Abstract

If you happen to’re available in the market for a kegerator or keezer system, there are tons of choices on the market. The Keg Connection package I had was excellent high quality each in appears and the eye to element like pre-assembling the important thing joints, and providing solely CM Becker disconnects. With the extent of customization accessible, you may add as a lot gear as wanted, and get upgrades which might be fairly priced. I’m positively happy with how effectively my previous kegerator is working now and the way nice it appears.

Get the Gear

Additionally: Kegerator Ideas & Gear | Keg Restore Half #s | Latest Keg Finds

Our Prime Draft Assets