I take advantage of a transformed chest freezer as my kegerator/keezer. With the help of some modifications like a collar and an overriding thermostat, it really works rather well. The massive draw back I’ve skilled is… condensation. Not simply beads of water on the perimeters, I had pooling water within the backside. Not a superb factor. This varies by how usually I’m in it, the season and present climate, however the reality is, a chest freezer simply isn’t designed to take care of condensation like a fridge is.
Get Present Value & Store Round, How-To Continues Under:
Enter the Eva-Dry E-500. The Eva Dry comprises a desiccant materials that absorbs moisture. The beads inside this unit take up moisture. As they try this they alter coloration. After they have gone from blue to pink, it’s time to “renew” the unit. That is finished by eradicating it from the kegerator and plugging it into an outlet. The built-in heating ingredient drives off any constructed up moisture. When the beads flip blue (in a single day), you’re able to go. I don’t have to do that usually, often each couple months.
Absorbs Extra Moisture. No batteries or wires required. Simply regenerated. No messy spills or refills. Environmentally secure. 100% renewable. Extremely house saving.
Backside of the unit. This flips out when it’s time to recharge. It lays flat throughout regular operation.
Shut up on the freshly recharged desiccant beads
Trial: I recharged this unit on June 22. I’ve recognized that this works, however I wished to place some numbers to it. Footage and testing have been accomplished in my collared deep freezer based mostly kegerator.
I checked this round as soon as per week. Here’s a image of what I’d name the primary vital indicators of moisture construct up. This was taken on August tenth. That’s 49 days into the take a look at.
Right here’s what the beads appeared like on August tenth. The beads are what I’d name and translucent pink-ish. I left the unit in place for an additional week to see what would occur with moisture content material. It predictability… continued to worsen. On the 18th, I recharged the unit and wiped down the within of my kegerator to check circumstances with out the Eva-Dry in place.
This image was taken 8 days later at my first weekly take a look at. That is what I’d name an identical degree of moisture after solely 8 days vs 49 days with the Eva-Dry. I’ve little question that water would find yourself pooling within the backside of my kegerator, in comparatively brief order, with out the Eva-Dry in place.
I took the ultimate weight of those on 8-17. My Escali Primo has it coming in at 876 grams.
And once more the subsequent day after recharging. It got here in at 772 grams. A full 104 grams of water was pushed off throughout recharging.
Utilizing my Quick Weigh MS-500-BLK I measured out proper at 104 grams of water. I used the tare function so that is really 104 grams of water. It almost fills a taster glass. This represents what the Eva-Dry absorbed and the water that will have in any other case been sitting in my kegerator.
Conclusions
I’ve had this identical unit since October of 2008. This trial befell round August of 2013. As of this replace (June of 2021), apart from a barely curling label, this appears like new and it definitely works like new. I went from beads of water on the partitions of my kegerator and swimming pools of water on the backside to an almost dry. I can confidently suggest this to you to assist resolve kegerator condensation points.
What are different folks saying? Search this product’s Amazon critiques for “kegerator” – word that a number of variations of this product could also be obtainable, as such a special model might seem at this hyperlink
Troubleshooting: Nonetheless having issues?
Many, many HBF Readers use this unit to deal with kegerator condensation points. I’ve beneficial it for years and used it in my very own kegerator for years. I hear largely nice issues again from folks. Periodically, I’ll hear that it didn’t repair the issue. I’m satisfied most of those instances are capability associated. In case you’re nonetheless having points, try the suggestions beneath.
Some issues to contemplate:
- Be sure your kegerator is as tight as attainable. Put a flashlight on the within and (in a darkish room) search for mild. Add climate stripping or insulation to drawback areas.
- Add a recirculating fan. A recirculating fan isn’t going to take any moisture out of the air. It will blow it round. The factor it ought to do is make the absorption course of extra environment friendly. Contemplate this fan – through Amazon [Related: Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan] Due to HBF Reader John for this tip! John makes use of this fan – through Amazon or through Amazon.ca
- Contemplate including one thing beneath your kegs to extend airflow. I take advantage of San Jamar Interlocking Bar Mats – through Amazon. See: Improve Your Kegerator – 6 Enhancements
- Capability Points: In case you’re nonetheless having condensation points I’d counsel including one other unit. There isn’t a doubt the Eva-Dry E-500 absorbs moisture. After that it turns into a query of capability. An illustration – If I spill a half gallon of water and put a single paper towel on it, it could instantly soak the paper towel and depart water behind. I might say, “paper towels don’t work.” It’s not that paper towels don’t work, they do work. I simply didn’t use sufficient paper towels to handle my drawback. If all the pieces else is true and also you’re nonetheless having condensation issues, I’m suggesting that it is best to contemplate including extra absorption capability within the type of an extra unit.
- Unit gained’t recharge? In case your unit merely will no recharge then the built-in hotter or the desiccant pellets have failed. In case you’re nonetheless beneath guarantee, I’d counsel contacting the producer. If not, a substitute is so as.
Additionally: Kegerator Ideas & Gear | Keg Restore Half #s | Current Keg Finds
Our High Draft Assets!
This can be a High Submit! See: All High Posts
Be sure the parts you utilize are suitable and rated on your meant software. Contact producer with questions on suitability or a particular software. At all times learn and comply with producer instructions. toppost:kegeratorcondensation rs:6 tag:tpr