Arms on Overview: Craftsman Deep Nicely Sockets for Ball Lock Keg Posts

What Measurement Are Ball Lock Keg Posts?

There are two main publish sizes for traditional ball lock kegs.  11/16″ and seven/8″.  These can are available in each 6 level and 12 level, suitable variations.  I’ve seen two different publish sizes. 5/8″ and 9/16″.  I think about these extra non-standard.  This publish focuses on 11/16″ and seven/8″.

I normally use a wrench when coping with ball lock keg posts.  I’ve one wrench that works with each sizes – See: Arms on Overview: “Ball Lock Keg Wrench” – 11/16″+7/8″ Ratcheting Wrench – by way of Apollo Instruments Wrench Set – however having a socket is usually tremendous helpful and typically probably required.

What about 12 Level vs 6 Level Posts?

For the bigger 7/8″ posts I’ve seen each 6 level and 12 level types.  A 12 level socket will work on a 6 level publish, however not vice versa.  For the smaller 11/16″ posts I’ve solely seen 6 level.  To not say that 12 level don’t exist, I simply don’t recall seeing any.

This publish seems at each sizes to show what I’m saying right here, nevertheless, when searching for a 7/8″ socket, I like to recommend a 12 level design.  That offers you the flexibleness to work with each 6 and 12 level fashion posts.  For the smaller 11/16″ socket, a 6 level design ought to work.

These Solely Work With Ball Lock Kegs, Why?

These sockets will solely work with customary Ball Lock Keg Posts.  Pin Lock Kegs require a particular socket that has a notch in it to permit the publish pin to slide by.

Heaps extra data… What’s the Distinction Between Ball Lock Kegs and Pin Lock Kegs?

When you want a Pin Lock Socket, See: Keg Sockets – Select Your Sockets – by way of Keg Connection, select the Pin Lock Possibility

Arms on Overview Craftsman Sockets for Ball Lock Keg Posts

This publish seems at 4 Craftsman Deep Sockets.  I bought these at Amazon.  Observe that a number of variations of this product could also be obtainable, as such a unique model could seem if you click on on the product hyperlink

• 11/16″ 6 level: CRAFTSMAN Deep Socket, SAE, 3/8-Inch Drive, 11/16-Inch, 6-Level (CMMT43336)
• 11/16″ 12 level: CRAFTSMAN Deep Socket, SAE, 1/2-Inch Drive, 11/16-Inch, 12-Level (CMMT47524)
• Not Beneficial, See Conclusions on the finish of this evaluation – 7/8″ 6 level: CRAFTSMAN Deep Socket, SAE, 3/8-Inch Drive, 7/8-Inch, 6-Level (CMMT43339)
• 7/8″ 12 level: CRAFTSMAN Deep Socket, SAE, 1/2-Inch Drive, 7/8-Inch, 12-Level (CMMT47528)

For the reason that driver that I hold in my brewery space is 3/8″ drive, I additionally used this adapter

Craftsman Socket Adapter 1/2″ Drive to three/4″ (04271)

All 4 Craftsman Deep Nicely SocketsProduct Tag for 7/’8 6 LevelProduct Tag for 7/’8 12 LevelProduct Tag for 11/16″ 6 LevelProduct Tag for 11/16″ 12 LevelA glance within the properly aspect of the the 6 level socketsA glance into the driving force aspect of the 6 level socketsThe sockets with my 3/8″ drive Craftsman Ratchet.  Mine is mannequin 44808, however most 3/8″ drive ratchets ought to work.

Testing the Smaller 11/16″ Sockets

The 11/16″ 6 pt Deep Nicely Socket works with a 11/16″ 6 pt Ball Lock SubmitOne other photograph: The 11/16″ 6 pt Deep Nicely Socket works with a 11/16″ 6 pt Ball Lock SubmitWorky! The 11/16″ 6 pt Deep Nicely Socket works with a 11/16″ 6 pt Ball Lock SubmitThe 11/16″ 6 pt Deep Nicely Socket works with a 11/16″ 6 pt Ball Lock Submit on a ten Gallon Torpedo Keg – Arms on Overview.  In my expertise a suitable socket is a close to requirement in case you personal this keg.  It’s doable to get to with a wrench, however powerful.

Testing the Bigger 7/8″ Sockets

This can be a 7/8″ 6 level ball lock keg publish
The 7/8″ 6 pt Deep Nicely Socket works with a 7/8″ 6 pt Ball Lock SubmitOne other photograph: The 7/8″ 6 pt Deep Nicely Socket works with a 7/8″ 6 pt Ball Lock SubmitThis can be a 7/8″ 12 level ball lock keg publishNo worky – 7/8″ 6 pt Deep Nicely Socket doesn’t work with a 12 pt Ball Lock SubmitThe 7/8″ 12 pt Deep Nicely Socket DOES work a 7/8″ 12 pt Ball Lock Submit

3/8″ Driver to 1/2″ Socket

For the reason that driver that I hold in my brewery space is 3/8″ drive, I additionally used this adapter – Craftsman Socket Adapter 1/2″ Drive to three/4″ (04271) – with the 1/2″ drive 12 pt socketsMy driver + adapter + 11/16″ 12 pt deep properly My driver + adapter + 7/8″ 12 pt deep properly

Conclusions

I’ve lots of expertise with Craftsman instruments.  I believe they produce high quality instruments at usually affordable costs.  These sockets are properly made, usually properly priced and work properly to take away ball lock posts.

For the smaller 11/16″ ball lock posts it in all probability is smart to purchase a 6 level socket.  For bigger 7/8″ posts it is smart to me to purchase a 12 level socket.  The 6 pt model works with 6 pt ball lock posts, however it’s probably you’ll run into each 6 pt and 12 pt designs.  Getting the 12 pt 7/8″ means you may work with each.

Verify Costs and Availability

Observe that a number of variations of this product could also be obtainable, as such a unique model could seem if you click on on the product hyperlink

• 11/16″ 6 level: CRAFTSMAN Deep Socket, SAE, 3/8-Inch Drive, 11/16-Inch, 6-Level (CMMT43336)
• 11/16″ 12 level: CRAFTSMAN Deep Socket, SAE, 1/2-Inch Drive, 11/16-Inch, 12-Level (CMMT47524)
• Not Beneficial, See Conclusions Part – 7/8″ 6 level: CRAFTSMAN Deep Socket, SAE, 3/8-Inch Drive, 7/8-Inch, 6-Level (CMMT43339)
• 7/8″ 12 level: CRAFTSMAN Deep Socket, SAE, 1/2-Inch Drive, 7/8-Inch, 12-Level (CMMT47528)

For the reason that driver that I hold in my brewery space is 3/8″ drive, I additionally used this adapter

Craftsman Socket Adapter 1/2″ Drive to three/4″ (04271)

Different Choices:

If you wish to go searching for different potential choices…

Search Amazon for “7/8″ deep socket 12 level” and 11/16″ deep socket

I counsel searching for suitable sizes, each to your driver and a correct measurement for the ball lock posts. you will have.  As talked about beforehand I like to recommend 12 pt for 7/8″ sockets.  Additionally search for high quality supplies and good critiques.

Additionally: Keg Sockets – Select Your Sockets – by way of Keg Connection

One other potential answer for 12 level 7/8″ Ball Lock Submit – See: Arms on Overview: “Ball Lock Keg Wrench” – 11/16″+7/8″ Ratcheting Wrench – by way of Apollo Instruments Wrench Set

Associated:

Rebuild Your Used Kegs!

Keg Offers!

Keg Critiques!

Meals Grade Keg O-rings in Bulk!

Extra Homebrew Finds!

Additionally: Kegerator Suggestions & Gear | Keg Restore Half #s | Current Keg Finds

Our Prime Draft Sources!

Be sure the elements you utilize are suitable and rated to your meant utility.  Contact producer with questions on suitability or a particular utility.  At all times learn and comply with producer instructions. evaluation:craftsmansockets tag:tpr