Palms on Evaluate: Kegland DuoTight Fittings & EVABarrier Tubing!

Kegland’s DuoTight Fittings are designed to work with EVABarrier Double Wall Tubing.  They provide fast, dependable connections, straightforward implementation, a wide range of becoming choices and have wonderful versatility.  They’re additionally, typically talking, very effectively priced.  DuoTights are push to attach fittings and require no tubing clamps.

Restricted Time DEAL, Evaluate Continues Under:

• For a short while, William’s Brewing is discounting DuoTight fittings by 15%
• No coupon code is required.  Low cost mirrored at checkout.

Kegland DuoTight Fittings and Equipment!

In This Evaluate:

• Tips on how to Use DuoTight Fittings – No Instruments or Clamps Wanted!
• DuoTight and EVABarrier Sizing
• A Nearer Take a look at DuoTight Fittings, EVABarrier Tubing and Associated Instruments
• DuoTight Appropriate Locking Clips
• Extra About EVABarrier Double Wall Tubing
• EVABarrier Tubing Resistance Estimations
• Beer Line Tidy for EVABarrier Tubing
• Does EVABarrier Tubing Work with John Visitor Fittings?
• Changing My Kegerator to DuoTights and EVABarrier
• Suggestions for skipping ball valves in your DuoTight Setup
• A Tweak For Tremendous Clear DuoTight Kegerator Installs
• Construct a DuoTight CO2 Gasoline Manifold
• Kegland DuoTight Ball Lock QDs
• Strain Assessments
• What’s the Most Strain for DuoTight Fittings?
• Nukatap Counter Strain Bottle Filler
• DuoTight Inline Secondary Regulators
• BlowTie Spunding Valves
• Leaks? Troubleshooting EVABarrier/DuoTight Leaks
• Conclusions
• Extra Fascinating and Distinctive DuoTight Appropriate Fittings & Gear

Tips on how to Use DuoTight Fittings – No Instruments or Clamps Wanted!

DuoTights characteristic a novel double EPDM O-ring design.  Coupling and uncoupling is fast and simple and requires no instruments or clamps.

DuoTight Ball Lock QD on Left, Appropriate EVABarrier Tubing on ProperMaking a stress succesful connection is as straightforward as pushing the tubing all the way in which within the becoming and firmly pulling the tubing out.To disengage the connection press the collar towards the becoming physique and pull on the tubing.  A pair instruments can be found to assist with this course of.  See beneath for photographs and hyperlinks.

Discovering DuoTight Fittings and EVABarrier Tubing, Evaluate Continues Under:

DuoTight and EVABarrier Sizing

DuoTight Fittings and EVABarrier Tubing are typically out there in two sizes, 8 mm and 9.5 mm.  Your fittings and tubing must be the identical dimension to be appropriate.  Measurement converters can be found, however I’d typically counsel selecting one dimension and standardizing on it.  For many homebrewers, I feel that the 8 mm dimension in all probability makes probably the most sense.  It doesn’t actually matter for fuel and the smaller dimension will in all probability be extra handy to homebrewers because it presents elevated resistance on the liquid facet.  If in case you have a professional setup or lengthy runs, the 9.5 mm dimension might make extra sense.  Both method, perceive that a number of sizes can be found for a lot of however not all fittings and equipment.

I’ve standardized on 8 mm.  These are pictured and mentioned on this evaluation however common ideas ought to apply to each all sizes.

Be aware that typically DuoTight and EVABarrier tubing are labeled utilizing English measurements 3/8″ for 9.5 mm and 5/16″ for 8 mm and 15/64″ for six mm.

A Nearer Take a look at DuoTight Fittings, EVABarrier Tubing and Associated Instruments

DuoTight x 1/4″ Flare Becoming.  I take advantage of these for keg QDs, manifold conversion and regulators.DuoTight x 1/4″ Flare Becoming.  A have a look at the flare threads.

Extra DuoTight Critiques on How-To’s!

DuoTights are so wonderful – not less than in my guide 🙂 – that I’ve a number of critiques and associated prime posts. These are principally linked on this evaluation, however right here’s a rundown for fast reference.

DuoTight Examine Valve.  These hold issues shifting a method.  Significantly useful to assist stop backflow on the fuel facet.DuoTight Examine Valve.  Facet view – the arrow reveals circulation path.  This becoming is labeled duotight 8.  The 8 is a sign of the 8 mm dimension.DuoTight to Feminine Beer Thread.  I take advantage of these on my kegerator shanks.DuoTight to 1/4″ ThreadsDuoTight to 1/4″ Threads – Facet view – This becoming is labeled duotight 8.  The 8 is a sign of the 8 mm dimension.A Look into the DuoTight to 1/4″ Thread BecomingDuoTight to 1/4″ Threads – the threaded facet.  Be aware this becoming contains an o-ringDuoTight Joiner/Coupler.  Used for becoming a member of two sections of EVABarrier Tubing collectively.DuoTight Tee Becoming.  A number of makes use of, however one good one is including one other keg to your kegerator with out using a manifold.  The modular DuoTight system permits you to simply configure and reconfigure your kegerator.
DuoTight Ball Valve.  I feel you’ll be able to probably skip these for kegerator installations.  See some ideas and tips about that beneath. DuoTight Ball Valve.  If you happen to zoom in you’ll be able to see that the deal with is labeled to point which path is on and which is off.  That is additionally labeled duotight 8.DuoTight Cutter – William’s Brewing | MoreBeer – this can be a multi perform machine.  In fact it’s a tubing cutter but it surely’s additionally designed that can assist you take away tubing from DuoTight Fittings.  That a part of the device is pictured on the left facet of this photograph.  I do like this for slicing tubing, I’m not as massive of a fan of utilizing it for serving to to take away tubing.  That a part of the device is simply too flimsy for my part.  What works lots higher for serving to to take away EVABarrier tubing….MoreBeer’s KOMOS branded Draft Multi Instrument has a notch in it (prime center on this photograph) that’s designed to assist take away EVABarrier tubing.  This can be a a lot heartier device that works lots higher for eradicating tubing from DuoTight Fittings.CO2 Gauge.  I like to recommend selecting one in all these up.  It’s good for checking for leaks and you can even simply throw collectively a keg stress gauge.  The gauge could be a bit troublesome to disengage from DuoTights in my expertise.  When you get the grasp of it, it’s straightforward sufficient.  But it surely’s positively tougher to disengage as in comparison with EVABarrier Tubing.

Saying: New Digital Gauge Possibility!

Kegland has introduced a brand new digital gauge possibility! 0-90 PSI, auto-shutoff after 15 seconds and a 2 yr battery life with typical use.

Kegland has launched a digital gauge possibility that works with their nice inline secondary regulator and BlowTie Spunding Valve.  They’ve additionally launched a DuoTight model. This can be a arms on have a look at each together with upgrades of the inline regulator and BlowTie.

Take a look at my in depth Palms on Evaluate

MoreBeer

William’s Brewing

Due to this technique’s modularity, it’s straightforward to take items from one meeting to make one other.  On this instance, I pulled the gauge from my BlowTie v1 meeting and make a Ball Lock meeting to verify for leaks

DuoTight Appropriate Locking Clips

DuoTight Fittings have a collar that’s engaged and disengaged to attach and take away tubing with out instruments or clamps.  That collar can settle for a locking clip to stop the connection from disengaging.DuoTight Appropriate Locking Clips by way of Valuebrew.  Be aware the blue clip that’s put in within the collar.  These snap into place and stop the connection from disengaging, locking the connection in place.Valuebrew DuoTight Appropriate Locking Clips set up on a number of DuoTight Fittings

Extra About EVABarrier Double Wall Tubing

A spool of 8 mm OD EVABarrier TubingA glance a the inkjet labeling on this tubing – 50cm(20 inch) KLO06224 EVABarrier 4mm*8mm Double Wall

EVABarrier tubing is BPA and PVC free.  It’s appropriate for each dwelling {and professional} purposes.  It includes a double wall design to guard towards oxidation.  The graceful interior wall is designed to assist stop microbial progress.  It’s out there in a wide range of sizes and is mostly very effectively priced.

EVABarrier Tubing Resistance Estimations

While you’re balancing your kegerator, it’s essential to know what every element of your system gives in the way in which of resistance.  See: Step by Step: Balancing Your Kegerator Draft System

Credit score for EVABarrier resistance goes to William’s Brewing

Inflexible Tubing Joiner

These are small items of inflexible DuoTight appropriate tubing. that enable you neatly DuoTight fittings and equipment collectively. I wouldn’t name these EVABarrier tubing, as a result of they’re completely different. Way more inflexible and all a uniform size.

Kegland’s Inflexible Joiner – Palms on Evaluate

Beer Line Tidy for EVABarrier Tubing

This straightforward adhesive holder is ideal for organizing your EVABarrier beer and fuel strains. Simply take away the backing and stick. 4″ lengthy, these maintain 5 beer strains every.

DuoTight Appropriate Solenoid Valves!

This tremendous helpful Solenoid Valve is appropriate with small 1/4″ or 6.35 mm OD tubing. This dimension tubing is usually used on water filtering programs or reverse osmosis programs, and can be utilized with an Inline Regulator to drop your mains water stress if wanted. To combine the Inline Regulator, additionally, you will want a Duotight adapter to step up the tubing dimension to be used with EVABarrier 8 mm OD strains.

In contrast to another solenoid valves this can be a direct performing solenoid valve which means the solenoid valve can go right down to 0 stress. This makes it fairly helpful for controlling CO2 circulation or different low-pressure gasses. Appropriate for pressures as much as 115 psi (8 bar) so it’s going to deal with water stress with no downside in any respect.

Constructed from high-quality steel and POM engineering plastics so it’s sturdy and appropriate for contact with a variety of chemical substances and drinks.

Solenoid Vavlve | Duotight Appropriate | 12V | 0-115 psi | 6.35 mm D1087 – by way of MoreBeer

DuoTight Inline Filter!

Duotight 6.35mm Filter

Extra Data

Duotight 6.35mm Filter – by way of William’s Brewing

Does EVABarrier Tubing Work with John Visitor Fittings?

Sure. EVABarrier Tubing will work with appropriate John Visitor Fittings.

Heaps Extra Stuff, Evaluate Continues Under:

Changing My Kegerator to DuoTights and EVABarrier

Previous setup.  Every shank required a beer nut, tail piece, tubing clamp and piece of tubing.  In my case I had small sections of tubing after which QDs to connect beer strains.DuoTight Feminine Beer Thread Fittings – replaces beer nut, tail piece and tubing.Put in!  One effectively thought out becoming to switch three.All 4 faucets transformed to DuoTight.  You’ll be able to see the perimeters of my Intertap Taps on the prime of this photograph – Palms on EvaluateIt’s DuoTight to Flare Fittings which can be as much as bat subsequent.  These will go on my regulator and Ball Lock QDsMy regulator transformed to DuoTights.  A bit of EVABarrier Tubing to CO2 gauge is getting used to verify for leaksI strung collectively a number of tees to check every faucet for potential leaks.  The modularity of DuoTights makes checking for leaks straightforward and it takes the guesswork out of the method.  I can conclusively let you know my setup was leak free.Each our bodies of my twin stress regulator transformed to DuoTightA Ball Lock Gasoline QD Transformed to DuoTightTwo kegs plumbed utilizing DuoTight Fittings.  The modularity of DuoTight Fittings makes it straightforward to arrange your kegerator with out using a fuel manifold.  A tee+verify valve means you’ll be able to simply add one other keg.

Suggestions for skipping ball valves in your DuoTight Setup

As you’ll be able to see from these photographs, I’ve not used ball valves to transform my kegerator to DuoTights and EVABarrier Tubing.  If you happen to determine to do this and need to reconfigure tubing, simply disengage all linked QDs and switch off your regulator shut-off (or flip the tank valve off).  If you happen to go away all the pieces open and on, you possibly can needlessly waste a bunch of CO2.

The next improve can even assist with this subject…

A Tweak For Tremendous Clear DuoTight Kegerator Installs…

I’m going to make the case {that a} specific CM Becker/CMB product is a large improve for manifold-free installs.  CMB’s QD with in-built verify valve.  The in-built verify valve means you’ll be able to skip the DuoTight verify valve.  Each configurations work, however the addition of the CMB QD with inline verify valve actually cleans up the set up.Each choices facet by facet.  QD + DuoTight Flare Becoming + EVABarrier Tubing + DuoTight Inline Examine Valve VS  CMB Inline Ball Lock QD + DuoTight Flare BecomingEach choices put in.  As acknowledged beforehand, each work, however the CMB QD actually simplifies and cleans up the setup.CMB QD + DuoTight Flare Becomingthree kegs, three choicesFull setup – DuoTight Fittings and EVBarrier Tubing put in in my kegerator

One other profit to utilizing these is that incorporating DuoTight Ball Valves into your setup just isn’t as vital.  Since fuel can solely circulation in to your keg (the verify options stops it from flowing out of your keg), you don’t want a ball valve to maintain fuel from exiting your keg if you take away EVABarrier tubing.

Ball Lock QDs are featured on this put up, however Pin Lock Checked QDs are additionally out there.

Or… Construct a DuoTight CO2 Gasoline Manifold

If you happen to’re in search of a extra conventional manifold.  That’s a simple proposition.  See: Construct a DuoTight CO2 Gasoline Manifold! – for Kegland EVABarrier Tubing

The Historical past of DuoTight Keg QD Choices

When DuoTights first got here out, the answer for connecting kegs to EVABarrier was utilizing an MFL QD + DuoTight Flare becoming. That works simply high quality and remains to be the one possibility out there to pin lock keg customers.

After a superb little bit of time Kegland launched a DuoTight possibility for Ball Lock Keg Customers!…

Study Extra… Palms on Evaluate: Kegland DuoTight Ball Lock QDs!

Saying: CombiBarb QDS!

CombiBarb QDs by WilliamsWarn are designed to work with each normal and EVABarrier Tubing. They’ve a barb that works with 1/4″ to five/16″ ID tubing AND they work with 8 mm EVABarrer.  They’re out there in each fuel and liquid variations.

Saying: Kegland DuoTight Ball Lock QDs w/Circulation Management

Kegland has launched DuoTight Ball Lock QDs + Circulation Management

These will enable DuoTight and EVABarrier customers to simply dial in resistance with out lengthy lengths of tubing.

Associated: What Does a Circulation Management Faucet Do? – Step by Step Balancing Your Kegerator Draft System

Strain Assessments

Checking a keg for CO2 leaksChecking my regulator for leaksChecking shank fittings for leaksChecking a transformed DuoTight manifold for leaks

I’ve accomplished many stress checks on these fittings and tubing.  Apart from connections that haven’t been fairly tight sufficient (my fault), the system has been rock stable.

What’s the Most Strain for DuoTight Fittings?

Usually talking DuoTights may be rated for as much as 100 PSI.  That may differ based mostly on the becoming or meeting.  See your favourite retailer or ask Kegland to verify specs if in case you have questions.  By no means exceed rated pressures.

Extra DuoTight Stuff!

The lineup options some further gear that’s distinctive and effectively thought out…

Nukatap Counter Strain Bottle Filler

Designed to will let you simply counter stress fill from Nukatap and Intertap Taps (and extra), Options DuoTight connections!

DuoTight Inline Secondary Regulators

Kegland Inline Secondary CO2 Regulator v2 – by way of MoreBeer – by way of William’s Brewing – by way of Amazon

That is the v2 improve of one in all my favourite homebrewing devices.  v1 was wonderful.  v2 provides a in-built gauge and DuoTight compatibility.  Each are enormous enhancements and make v2 all the higher.  You should utilize this to set particular pressures and carbonation ranges on every one in all your kegs and plenty extra.

Duotight In-Line Regulator D1046 – Identical thought as above with no gauge to cut back prices.

Mounting Boards for Inline Secondary Regulators

Thanks to /u/skaht on reddit for this photograph

These will let you neatly set up appropriate inline regulators for straightforward entry and a neat setup.

BlowTie Spunding Valves

BlowTie Spunding v1.  As of this evaluation, that is nonetheless out there to buy though it’s been changed by v2.

BlowTie Spunding v2 – by way of MoreBeer – by way of William’s Brewing.  Builds on v1 by including an built-in gauge.  This can be a nice Spunding Vale Resolution!

Saying: Digital Gauges for Inline Regulators and BlowTie!

Kegland has introduced a brand new digital gauge possibility! 0-90 PSI, auto-shutoff after 15 seconds and a 2 yr battery life with typical use.

Kegland has launched a digital gauge possibility that works with their nice inline secondary regulator and BlowTie Spunding Valve.  They’ve additionally launched a DuoTight model. This can be a arms on have a look at each together with upgrades of the inline regulator and BlowTie.

Take a look at my in depth Palms on Evaluate

MoreBeer

William’s Brewing

Sanitizing DuoTight Fittings – Star San & DuoTights?

I’ve gotten some suggestions in the case of DuoTights and Star San.  The supplies used in DuoTight fittings – Acetal, EPDM, Stainless – are typically appropriate with Star San. Nevertheless that doesn’t imply you can soak DuoTights in Star San endlessly.

Star Stan might ultimately harm DuoTights (and many different issues) given extreme publicity. Contact time for Star San is 5 minutes. That’s about how lengthy it is best to go away an element sitting in Star San.

See: Star San Suggestions & Tips

Leaks? Troubleshooting EVABarrier/DuoTight Leaks

I’ve carried out a number of stress exams with DuoTight Fittings and EVABarrier Tubing. Every take a look at has confirmed the examined elements have been leak free. Having stated that, it’s solely doable that you simply’ll have a leak. This occurs with any tubing system, that’s why we… verify for leaks. Some ideas…

• Examine for leaks as you’d if you happen to have been utilizing normal tubing. DuoTights and EVABarrier are wonderful… however not magic. They must be put in accurately and securely all through your system. Liquid liquids are straightforward to identify. Gasoline leaks are a bit tougher.
• I extremely counsel selecting up a DuoTight Strain Gauge. You’ll be able to simply add this to your setup and use this system for checking for fuel leaks.
• If in case you have a piece of EVABarrier tubing that’s marred or broken, lower off a pair inches to get a recent finish.
• Ensure you’re pushing the EVABarrier Tubing fully in to your DuoTight Becoming.
• Ensure you’re pulling your EVABarrier Tubing out firmly to interact the sealing mechanism.
• DuoTight Appropriate Locking Clips – I like to recommend utilizing these on all DuoTight connections. They snap into place pushing the collar out, securely partaking the becoming. In addition they assist stop bumps and strikes from disengaging the connection.
• If in case you have a specific becoming that gained’t seal… contact the vendor or producer to get a substitute. A leaking DuoTight becoming just isn’t regular and I’m guessing your retailer will care for you. Out of the handfuls of fittings I’ve I’ve had 1 that was non-functional on receipt.

Conclusions

Mix options, versatility, high quality and value and I feel the DuoTight/EVABarrier System is a recreation changer for kegerator builders and homeowners.  Kegland has produced some actually distinctive, effectively thought out and customarily very well priced homebrewing and beer gear.  I’ve owned and used these for months and proceed to be tremendous pleased.  If you happen to’re constructing a kegerator or are able to improve and modernize your setup, these deserve a really onerous look.

DuoTight Fittings and EVABarrier Tubing:

DuoTight Appropriate Locking Clips

Extra Fascinating and Distinctive DuoTight Appropriate Fittings & Gear

One of many coolest issues about DuoTights is their modularity.  Past the core system of EVABarrier Tubing and Fittings, further DuoTight Appropriate Fittings and merchandise can be found.

DuoTight x 1/4″ Barb Becoming

DuoTight Appropriate Picnic Faucet

Duotight Push-In Becoming – 9.5mm (3/8 in.) Feminine Bulkhead DUO125

Pluto Beverage Gun

Carbonation and Line Cleansing Ball Lock Cap

Foam on Beer Detector (FOB)

Oxygen Circulation Meter w/ Duotight FittingsDuoTight Appropriate Locking Clips

And… Extra

Extra DuoTight Critiques on How-To’s!

DuoTight Critiques, Useful resource Posts & How-To’s!

DuoTights are so wonderful – not less than in my guide 🙂 – that I’ve a number of critiques and associated prime posts

Extra Kegland Gear Critiques!

Extra Homebrew Finds!

Current Offers!

10 Most Current Homebrew Useful resource Posts & How-To’s!

We’re Homebrew Evaluate HQ!  Our 10 Most Current Critiques

Additionally: Kegerator Suggestions & Gear | Keg Restore Half #s | Current Keg Finds

Our Prime Draft Assets!

Worth, promotions and availability can change shortly. Examine the product web page for present value, description and availability.

Make sure that the elements you utilize are appropriate and rated to your supposed utility.  Contact producer with questions on suitability or a particular utility.  All the time learn and observe producer instructions. evaluation:duotight tag:tpr rs:6